1. Before starting, pinch the clutch and step on one gear, and let it go slowly. As long as the clutch is completely sent, you can enter the second gear. Those who have learned the car in these steps know when it should be added and when the gear should be maintained. This needs to be adjusted according to the engine characteristics and road conditions. When the road conditions are good, there are few people, you need to choose a high -end low -end turn when driving at a constant speed. As long as you do not drag files, try to use high -end to maintain the engine at a lower speed. This can save fuel and save machines.
2. Drise cars, you need to wear a car, and try to keep a high speed. One is to make a louder sound to let the car notice you in the front. Bend the bend. Before entering the corner, do a good job of slowing down the files (after saying that the file is reduced). Do not rise and lower the file during the bend (improper operation will cause the rear wheel to lose grip and fall the car).
3. When the file is predicted in advance, when the dentation needs to be slowed in advance, the mobility mechanism can be used to slow down. Pinch clutch, reduce one gear, replenish oil, and immediately relax. Repeat the engine speed after the speed. This action is the same as cars and toes. You need to grasp the degree of oil supplementation by practice. After you practice, you will not feel the car or rush forward after each reduction. If you feel that you have a pull, it means that the oil supplement is not enough, and you rush forward.
4. The action of replenishment of the gear reduction is required for fierce driving and bending. Especially for riding a large row, the rear wheel grip is large, and incorrect file reduction will cause impact on the crankshaft and clutch, and it will be easily damaged after a long time. It is easy to cause the rear wheel to slip when the road is slippery.
